DIN range and brake width — two numbers, no approximation · review
Marker Squire 11, 90 mm brake review
Marker's Squire 11, an all-mountain binding with a DIN range of 3 to 11, a 90 mm (3.54 in) brake, a Triple Pivot Light 2 toe with an Anti-Ice Rail and a Hollow Linkage 2 heel that Marker says cuts step-in force by 30%. It takes Alpine and GripWalk soles. $249.95 from third-party sellers on Amazon.com on November 7, 2026.
The Marker Squire 11, an all-mountain binding with a DIN range of 3.0 to 11.0 and a 90 mm (3.54 in) brake. The Triple Pivot Light 2 toe has an Anti-Ice Rail to scrape snow and ice from the sole; the Hollow Linkage 2 heel, Marker says, cuts step-in force by 30% and makes stepping in easier with GripWalk soles. It accepts Alpine (ISO 5355) and GripWalk (ISO 23223) boot soles and uses a stainless steel AFD for consistent release.
Who it is for
Marker’s own description targets lighter skiers, young freeriders and freestylers, and intermediates. DIN 11 at the top of the range covers most recreational skiers; heavy or aggressive experts who need a higher setting look at a binding rated beyond 11.
The brake width
90 mm fits skis whose waist is up to that width. A brake that is too narrow does not clear the ski; one that is far too wide drags in the snow on a hard edge. Check your ski’s waist before ordering.
GripWalk
GripWalk soles have a rockered, rubber-treaded sole that walks better than a flat Alpine sole. A binding has to be certified for them: this one is, which matters if your boots or your next boots are GripWalk.
Against the other bindings here
The Atomic and Fischer bindings on this site are the other options in this category; compare DIN range and brake width against your weight and your ski.
Availability
$249.95 on Amazon.com on November 7, 2026, with seventeen offers listed, all from third-party sellers.
Prices and availability were checked on the date this page was updated; both change without notice.
Prices quoted in this text were read on November 7, 2026. The live price is at the top of the page.
The declared figures, and where they run out
Strengths
DIN 3 to 11, a range that suits lighter and intermediate skiers
Takes both Alpine and GripWalk soles
An easier step-in, with 30% less force stated for the Hollow Linkage 2 heel
Compromises
DIN 11 at the top is too low for heavy or aggressive expert skiers
The 90 mm brake suits skis up to about 88 mm under foot only
Sold by third parties on Amazon.com, not by Amazon itself
Its two nearest pairs on price
Same aisle, closest price — what the same spend else rides.
Triple Pivot Light 2, with an Anti-Ice Rail to scrape snow and ice off the sole — stated
Heel
Hollow Linkage 2: 30% less step-in force, easier step-in with GripWalk soles — stated
Boot soles
Alpine (ISO 5355) and GripWalk (ISO 23223) — stated
AFD
Stainless steel anti-friction device — stated
Stand height
24 mm (0.94 in), according to Marker's published description
Color
White
Reference
7424V1MD · ASIN B09BK8RXVF
Questions asked about this one
What is the DIN range?
3.0 to 11.0, stated on the listing. The DIN value is set from your weight, height, age, boot sole length and skiing style; a ski shop sets it, and the binding suits skiers whose value falls within that range.
Does it take GripWalk soles?
Yes. The listing states compatibility with Alpine (ISO 5355) and GripWalk (ISO 23223) boot soles, and the Hollow Linkage 2 heel is said to make step-in easier with GripWalk.
Which skis does a 90 mm brake fit?
Skis whose waist is up to the brake width, in practice about 88 mm or slightly less. A brake narrower than the ski does not clear it; a much wider one catches the snow in turns.
Can I mount it myself?
It is a job for a ski shop: drilling to the boot sole length, then setting and checking the release value. A wrongly set binding is a safety issue, not a matter of comfort.
Our score
7.8/ 10
A well-specified all-mountain binding for lighter skiers: DIN 3 to 11, a 90 mm brake, GripWalk compatibility and an easier step-in. Have a shop mount it and set the release value.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $250 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 7, 2026.
What use this one answers, among winter sports gear
A lighter or intermediate skier on skis up to about 88 mm under foot, with Alpine or GripWalk boots.
Sources
Specifications: the manufacturer sheet for winter sports gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
DIN 4–12 · Auto-GripWalk · low LDN toe · 3-part heel · 115 mm (4.53 in) brake
A DIN 4–12 freeride binding with Auto-GripWalk, a low LDN toe and a light 3-part heel, on a 115 mm (4.53 in) brake. On Amazon.com, four third-party offers from $239.95 on November 7, 2026, none sold by Amazon itself.
Best for: A freeride or all-mountain ski over 100 mm (3.9 in) underfoot, with an alpine or GripWalk boot
Junior binding, Z-DIN 2–7.5, 90 mm (3.54 in) brake, GripWalk and standard alpine soles, for the Fischer Nightstick Team
A junior binding that publishes its full release range, DIN 2 to 7.5, and names both sole standards it accepts, GripWalk junior and standard alpine, with a 90 mm (3.54 in) brake. About $140 in the US.
Best for: A growing child on a junior ski, with either kind of junior sole, set up by a ski shop.
DIN 4–14 · 110 mm (4.33 in) brake · 17 mm (0.67 in) stand height · FR PRO 3 toe with AFD · 3-piece heel · ISO 5355 and ISO 23223 soles · 865 g stated
Tyrolia's Attack 14 GW is an all-mountain alpine binding with a DIN range of 4 to 14, a 110 mm (4.33 in) brake, a 17 mm (0.67 in) stand height and an FR PRO 3 toe that adjusts to alpine and GripWalk soles. About $279 from a third-party seller on Amazon.com.
Best for: A strong adult skier on wide all-mountain skis around 100 mm underfoot, who wants GripWalk compatibility and a high DIN ceiling.