Shell size in centimeters, and whether a visor replaces goggles · review
OutdoorMaster ELK MIPS helmet review
OutdoorMaster’s ELK with MIPS rotational protection and an in-mold PC shell, eight vents and a dial fit — about $56 on Amazon.com, with no certification named.
MIPS rotational protection, a reinforced PC shell with a shock-absorbing EPS core made by in-mold construction, 8 vents, a detachable lining, ear pads and a soft chin band, a size adjustment dial, and a goggle strap retainer. This listing is the large, in matte pink.
What MIPS adds
Most falls on snow are angled, not straight. MIPS is a low-friction layer that lets the helmet shift a few millimeters around the head at impact, aimed at reducing the rotational forces that cause concussions. The ELK and the Kelvin II MIPS have it.
In-mold, not ABS
The ELK’s thin polycarbonate shell is fused to the foam during molding. That is usually lighter than a thick ABS shell glued over EPS — the Kelvin method — while the ABS shell resists everyday knocks better.
What is missing
Any certification. The listing names neither ASTM F2040 nor EN 1077. The VANRORA Stomper does. The weight and a size chart are also absent; OutdoorMaster’s Kelvin II listings use S 48–54, M 54–58 and L 58–62 cm, which is a reasonable guide but not stated here.
Price
Two offers from $55.99 on Amazon.com when this page was revised.
Prices read on Amazon.com through Keepa on November 7, 2026; the live price is in the buy box.
Prices quoted in this text were read on November 7, 2026. The live price is at the top of the page.
The declared figures, and where they run out
Strengths
MIPS, a liner that lets the head rotate slightly inside the helmet in an angled impact
In-mold construction: the PC shell is fused to the EPS core, which is usually lighter than a separate ABS shell
Dial fit, detachable liner and ear pads, goggle retainer
Compromises
No safety standard named — no ASTM F2040, no EN 1077
8 vents, against 14 on the Kelvin models, and they are not adjustable
No size chart in the listing; this reference is a large
Its two nearest pairs on price
Same aisle, closest price — what the same spend else rides.
Multi-directional Impact Protection System: a low-friction layer inside the helmet that lets it slide slightly relative to the head in an angled impact, to reduce rotational forces on the brain.
Is the OutdoorMaster ELK certified?
The listing names no standard. On this shelf only the VANRORA Stomper states ASTM F2040 and EN 1077.
What is in-mold construction?
The thin outer shell and the EPS foam are molded together as one piece. It is generally lighter than the ABS hard-shell method used on the Kelvin helmets.
Our score
7.6/ 10
An in-mold MIPS helmet at a budget price, lighter in construction than the ABS Kelvins — without a named safety standard.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $56 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 13, 2026.
What use this one answers, among winter sports gear
A skier who wants MIPS and an in-mold shell for little money, and does not need a stated certification
Sources
Specifications: the manufacturer sheet for winter sports gear and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
Hybrid shell · MIPS · adjustable vents · In Form 2 (6 cm) · M 55.5–59 cm
Giro’s Tenet MIPS is a snow helmet with Hybrid Construction, a hard-shell upper over an in-mold lower, MIPS, Thermostat Control adjustable vents, an In Form 2 dial with up to 6 cm of adjustment and an Ionic+ fleece lining.
Best for: A rider who wants MIPS, a tougher shell and vents that open or close with one gloved hand